Determining Allowable Maximum Volume of Building (AMVB)

ALLOWABLE MAXIMUM VOLUME OF BUILDING (AMVB) Above-Grade – The limit of the total volume of space that can be occupied by a proposed building/structure above grade level. the AMVB is an imaginary prism within the fully enclosed areas and courts of a proposed building/structure shall fit.

Quantifying the AMVB. The AMVB shall be primarily determined by the following:

a. Multiply the AMBF (in square meters) for the lot by the applicable BHL (in meters) for the lot to arrive at the initial AMVB (in cubic meters); the result of this step is the imaginary footprint prism;

b. Superimpose the angular plane originating from the center of the RROW on the footprint prism; this shall result in the reduction of the initially computed building volume due to the application of incremental setbacks and of roof configuration dictated by the angular plane; the result of this step is the AMVB;

c. To crosscheck the AMVB against the Allowable Maximum TGFA (separately determined), convert the AMVB into its approximate area equivalent (in sq. meters) by dividing it with the BHL. Before converting the AMVB to its area component, check for the effects of the incremental setbacks on the TGFA for each floor of the proposed building/structure.



ENROLL NOW AT THE CENTER FOR CAREER DEVELOPMENT FOR A COMPREHENSIVE REVIEW ON RULES 7 & 8 DEVELOPMENT CONTROLS!!! CONTACT 02-4126364 or Email: uapcommunication@yahoo.com

Posted in: Design